Discover Chainsaw Sharpeners (Updated January 2018)

Chainsaw sharpener
(Last Updated On: January 5, 2018)

Chainsaw Sharpeners

Sharpening the chain is very important for several reasons. The first reason is that cutting with a dull chain leads to higher fuel consumption and excessive wear. With all of these chainsaw sharpeners, you can eliminate this problem and extend the lifetime of not only the chain but also the chainsaw. There are many methods of sharpening the chainsaw. There are manual and electrical methods. Hand-held would be sharpening with a classic file (image) which is both cheapest and efficient. While the electrical method is much more practical (Video), it’s more expensive but extremely efficient because it’s very accurate. Whether you use a chainsaw or not, and saw chain’s sharpness diminishes over time. You may have avoided cutting into objects that reduce its sharpness, but due to long-standing without any work, the chain also reduces its sharpness. In this way, the chain becomes blunt. When the chain is blunt, it is useless because it consumes both your strength and fuel. It is recommended that you sharp the chain every time when you refuel. It’s much easier when you sharp it a bit than when you wait for a full blunt. In this way, you save fuel, power and on the other hand, you work more efficiently.

Buffalo Electric Chainsaw Sharpener Review | Buffalo Tools |

Buffalo Tools ECSS Electric Chainsaw Sharpener

 

If you ‘re looking for a professional chainsaw sharpener, then Bufalo sharpener is one of these. Buffalo sharpener is small in size and is not crowded in relation to the competition. This chainsaw sharpener works on electric drive and it’s mobile. It is made of plastic that is mounted on the bench. The installation process is easy. This means that you can use this unit only at home, unless you have a power source. It is of the manna in relation to the hand-held chainsaw sharpener with which you can sharpen the chain after each session in the field. It works at 120 volts of voltage from the network.

  • Read our full report about – Buffalo Electric Chainsaw Sharpener Review

Specification:

Part Number – ECSS
Item Weight – 7 pounds
Product Dimensions – 13.5 x 9.5 x 6.2 inches
Item model number – ECSS Item Package Quantity – 1
Batteries Included – No
Batteries Required – No
4200 RPM grinding speed
Frequency – 60 Hz
Power – 85
Works on voltage 120v
Uses a 4-1/4-Inch x 1/8-Inch grinding wheel with 7/8-Inch arbor

THIS PRODUCT IS AVAILABLE ON AMAZON. FOR PRICE, SHIPPING CHECK LINK BELOW

 

Granberg Bar-Mount Chainsaw Sharpener, Model# G-106B

Granberg Bar-Mount Chain Saw Sharpener, Model# G-106B

This chainsaw sharpener is hand-operated. It’s very easy to use, it’s mobile so it’s possible sharpening chain between 2 sessions.Designed by Elof Granberg (in California) more than 35 years ago, the file-n-joint is an industry standard for accuracy and durability. This guide file allows your professional chain to right in your bar with precision. Will hold all file sizes for standard chain pitches and lowering depth gauges. Precision bar-mounted chain saw sharpener/file holder made of cast aluminum and zinc-plated steel. Use calibrated swivel guide markings to set and hold correct sharpening angle. Integrated features allow users to set file height and tooth length.

The sizes are 9.5 x 1 x 3.5 inches, it is not heavy 1.7 pounds and is easily mounted. The processing process you can see in the next video is about 3 minutes. Average time per cutter is 6 seconds with installation time included. The assembly process is as follows: The chainsaw is placed in the hard place so that the chainsaws do not start due to the sharpening chain. Then Chainsaw sharpener was placed on the chain. Now, when it’s set up, the right sag is wrapped up to secure it.Then when it’s all well-mounted, very easy as you can see in the  video, you can sharpen the chain

Specification:

Product Dimensions – 9.5 x 1 x 3.5 inches

Item Weight – 1.7 pounds

Manufacturer- Granberg

Type of sharpener – manual

Mobile – Yes

THIS PRODUCT IS AVAILABLE ON AMAZON. FOR PRICE, SHIPPING CHECK LINK BELOW

 

Oregon 410-120 Bench or Wall Mounted Saw Chain Grinder

Oregon chainsaw sharpener

If you read the first report about the Buffalo Tools ECSS Electric Chainsaw sharpener, this will be a very similar report because these two devices are very similar. The dimension is 1 x 1 x 1 inches and weighs 17 pounds. It works on an electric drive. This Oregon Bench/wall Mount Chain Grinder is designed for the occasional user. Three fixes for this chainsaw sharpening are Grinder head angle, top cutting angle and ten degrees down angle. For the grinder head angle on the back, they have a clamp to set the angle to put the head in a suitable position. Now, when you do this setting, set the top cutting angle by rotating the chain to the next set to the appropriate setting. Down on the device, the last one is a tune, which is a ten-degree angle, which must always be exactly adjusted.

It is very important to clean the chain before the chain is sharpened. This is very important in order not to damage the shreds and the chassis. The chain can travel freely on the track, to stop this adjust the chain stop, Paul. So that the center of the Paul is on the cutter being sharpened next turn the rear chain adjustment knob until the cutter just engages the wheel. This adjustment is very important because it controls how much material is to be removed when the grinding wheel finally ideally sets the depth of the wheel to be at least down to the pull in the cutter

Note: The grinding wheel should never be set too deep because it can damage the chassis

The wearing of protective equipment is mandatory because this chainsaw sharpener is like grinders. When you grinding always use a quick tapping technique to minimize burning of the surface of the cutters. Adjusting depth gauges is required and requires about three or four sharpening for setting chain depth gauges. Oregon includes a dressing Brick, a quick check grinding template, and three grinding wheels for sharpening of 1/4″, 3/8″ Low profile, .325″, 3/8″ and .404″ pitch chain

Specification:

Product Dimensions – 1 x 1 x 1 inches

Item Weight – 17 pounds

Manufacturer – Blount International

Frequency – 60 Hz

Works on voltage 120v

Mobily – No

THIS PRODUCT IS AVAILABLE ON AMAZON. FOR PRICE, SHIPPING CHECK LINK BELOW

Timberline Chainsaw Sharpener with 3/16″ Carbide Cutter

Timberline chainsaw sharpener

The Timberline Chainsaw Sharpener is in this field far ahead of others. From the experience of the right professionals, it’s really the most advanced and simplest chainsaw sharpener. The Timberline Chainsaw Sharpener is mobile, hand-operated and precise, the best product on the market from this category, the recipient of great awards. Because of its small dimensions, it is possible to carry it everywhere with it even in your pocket. Weight is only 1.1 pounds and dimensions 3/16″ carbide cutter. Installation and use are very simple.

The chain remains on the saw and the tool clamps on the bar and allows the chain to be pulled through as each tooth is sharpened. A high-grade tungsten carbide cutter is hand turned with a handle. Only a small amount of material is removed from each tooth resulting in much longer chain life. Carbide guides are fixed at a universal angle of 30 degrees while 25 and 35-degree guides are offered separately. You get a device and a carbide cutter with this handle slide. Then adjust the beam, so that the pivot is pointing right in the middle and then tighten it down. When you do this, make sure the chain goes through nice and smooth and does not catch anything. When you check this, the next thing is to put your cutter right on the inside of your tooth. Then you’ll tighten the sucker down tightly down until it really gets into the top of that blade, and then you turn to the clockwise and push in. Tighten a little more for better sharpness.

This product:

+Fast Sharpens Each Tooth in Seconds
+Precise Every Tooth Sharpened to the same Length and Angle
+Durable High quality Machined Aluminum
+Portable Take Everywhere and Sharpen Anytime
+Easy Anyone can Sharpen a Chainsaw with Professional Results

Specification:

Item Weight: 1.1 pounds

Package Dimensions: 6 x 4.2 x 4 inches

Size: 3/16″ carbide cutter

Mobile: Yes

Drive: Manual

THIS PRODUCT IS AVAILABLE ON AMAZON. FOR PRICE, SHIPPING CHECK LINK BELOW

 

3 Piece Chainsaw Chain Saw Chain Sharpening 

3 Piece Chainsaw sharpener

Old school. Dress chainsaws in the field quickly and safely with this chainsaw file set! The high carbon steel file set includes files for the most popular chains. ABS style handles allow a comfortable grip and maximum control. This handy chainsaw file set is great for landscapers, woodworkers and anyone using chainsaws to keep their blades sharp!

Specification:

High carbon steel ABS handles Sizes – 5/32″, 7/32″, 3/16″

Item Weight: 4.8 ounces

Product Dimensions – 12 x 3 x 6 inches

ABS handles

8″ Chain Saw File Set

THIS PRODUCT IS AVAILABLE ON AMAZON. FOR PRICE, SHIPPING CHECK LINK BELOW

TruePower 01-0854 Electric Chain Saw/Chainsaw Blade Sharpener

TruePower chainsaw sharpener

If you read our reports on Buffalo Tools ECSS Electric Chainsaw Sharpener and the Oregon 410-120 Bench or Wall Mounted Saw Chain Grinder, then you are absolutely clear about the type of chainsaw sharpener that works. This chainsaw sharpener works on electric drive. It’s not mobile, so you can usually work with it at home unless you have any power source with you on the ground. The difference between these 3 products is specifically in the price, while in practice they are very similar and give more or less similar results.This 1 HP 3-3/8″ blade toe-kick saw will cut flush up to a wall or baseboard so you don’t have to move cabinets to remove the flooring underneath. The saw has a dual handle to provide steady control and features an automatic guard return. The blade is carbide Tipped for easy and precise cutting. The saw has a dual handle to provide steady control. Trigger switch with safety button

Specification:

Item Dimensions: 14 x 10 x 7 inches

Item Weight: 6.5 pounds

Manufacturer: TruePower

Mobile: No

Drive: Electrical

 

 

THIS PRODUCT IS AVAILABLE ON AMAZON. FOR PRICE, SHIPPING CHECK LINK BELOW

 

Chicago Electric Chainsaw Sharpener by Chicago Pneumatic

Chicago electric sharpener

This electric chainsaw sharpener is made by Harbor Freight. The assembly process is almost the same as for previous models we wrote about. In order for this chainsaw sharpener to work, he needs a fiscal, stable support. This electric chain saw sharpener mounts to a bench, wall or vise for convenient sharpening of your chainsaw. This is because in the process of working chainsaw sharpener is static, while the chain is mobile in relation to the chainsaw sharpener. Featuring a 4200 RPM grinding speed, large side safety guard and chain rotation rollers to advance links, this chain saw sharpener is quick, safe and powerful In comparison to the previous models we wrote about, brake handle is located at the top. It is used at the moment when the individual part of the chain is processed on a chainsaw sharpener. In comparison to the previous models we wrote about, brake handle is located at the top. It is used at the moment when the individual part of the chain is processed on a chainsaw sharpener. The entire chain security from starting during processing is provided with a small brake at the place where the chain should stand. In order to achieve maximum accuracy and inability to move around during work, there is a small adjuster bolt that is on the center chainsaw sharpener and when it comes down it stops at the intended location. A very important thing in order to be the correct process of work and achieve the maximum sharpness is to set the proper processing angle. To adjust the angle, it is best to examine the manuals supplied with your chainsaw sharpener. When these settings are done properly, the working process is next. This process is very similar to previous models. The blade is placed on the tape. And then there is a processing process that you can see in detail on the next video

 

Specification:

Grinding Speed – 4200 RPM

Package Height – 6.7 x 9.8 x 14.2 inches

Item Weight – 6.55 pounds

 

 

This electric chain saw sharpener mounts to a bench, wall or vise for convenient sharpening of your chainsaw. Featuring a 4200 RPM grinding speed, large side safety guard and chain rotation rollers to advance links, this chain saw sharpener is quick, safe and powerful. Improve the life span and cutting power of your chain saw with this simple but effective chain saw sharpener!
Chain vise adjusts to all chain designs and pitches
•Chain rotation rollers advance links, eliminating frustrating setup time
Includes 4-1/4” x 1/8” grinding wheel with 7/8” arbor
Mounts to bench, wall, or vise
4200 RPM grinding speed

Granberg G1012XT PRECISION GRINDER (12V)

Granberg chainsaw sharpener

A very simple chainsaw sharpener, which is mobile and achieves high efficiency in its work. The 24,000 RPM grinder features a Kevlar(R) reinforced drive belt, high-speed micro ball bearings, and heat-resistant polycarbonate case. Adjustable dials and thumb nuts allow you to set precise sharpening angles and grinding depths. Used for/with: Sharpening all saw chains Fits: Will hold all stone sizes for standard chain pitches and lowering depth gauges.

Specification:

Product Dimensions – 9 x 4 x 7 inches

Item Weight – 1.75 pounds

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *